If your Linksys Velop Password Not Working, there could be several reasons. Make sure you are typing the correct admin or Wi-Fi password first. Make sure Caps Lock is off, then gently try typing again. Reconnect using the new login information if you have recently changed it. You may need to reconfigure the network since firmware updates or system resets can occasionally reverse settings. Try again after restarting your Velop system. Reset the Velop node by holding down the reset button for ten seconds and then resetting it with the Linksys app if the problem continues. Are you still having issues? Look for network problems or interference. Login issues can also be successfully fixed by updating the firmware and reinstalling the Linksys app.